Ronch Viper Cut40
Inicio » Ronch Products in the U.S. » Ronch Viper Cut40
Description
The Ronch ViperCut40 is a plasma cutting machine. It can cut up to 9 mm (carbon steel).
VERSATILITY WITH GENERATORS
Developed to work with diesel generators and prepared to work even with input voltage peaks.
GAS FLOW
Selection of gas flow time, post-flow and pre-flow.
AMPERAGE REGULATOR
It is used to regulate the amperage at the moment of cutting.
RUN/SET
When running the gas test, select SET. When cutting the workpiece, select RUN.
FEATURES
- Power indicator: When lit, means the power is on
- Overheating alarm light: When overheating, the light will turn on
- Other indicators: Incorrect cutting torch installation and low air pressure alarm
- Voltage pilot lamp: Open arc indicator.
Request More info
Main features
In the box |
---|
S-65 Torch |
Hose |
Work clamp |
Features |
---|
Heavy duty work cycle: 60% |
Versatility with generators |
Electrical protection (PFP) |
Techical specs
Feature | Value | ||||
---|---|---|---|---|---|
Work cycle (40ºC 10min) | 40A a 60% / 30A a 100% | ||||
Input power (V) | 1-220/230/240±10% | ||||
Current range (A) | 20~40 | ||||
Recommended cut (mm) | ≤16 (Carbon steel) | ||||
≤12 (Stainless steel) | |||||
≤12 (Aluminum) | |||||
Maximum cut (mm) | ≤19 (Carbon steel) |
Feature | Value |
---|---|
Nominal input power (KW) | 4.9 |
Rated input power (A) | 32 |
No-load voltage (V) | 38.5 |
Power factor | 0.7 |
Refrigeration | AF |
Protection class | IP21 |
Shipping dimensions (mm) | 460 / 146 / 278 |
Net weight (kg) | 6.2 |